home *** CD-ROM | disk | FTP | other *** search
- Path: phoenix.earthlight.co.nz!michaelj
- From: Michael Johnstone <michaelj@phoenix.earthlight.co.nz>
- Newsgroups: comp.sys.amiga.hardware
- Subject: Adding a 2nd scsi hd to A2091
- Date: Sat, 20 Apr 1996 21:53:40 +1200
- Organization: Otago Polytechnic, New Zealand
- Message-ID: <Pine.LNX.3.91.960420192108.8865B-100000@phoenix.earthlight.co.nz>
- NNTP-Posting-Host: phoenix.earthlight.co.nz
- Mime-Version: 1.0
- Content-Type: TEXT/PLAIN; charset=US-ASCII
-
- I have an A2000 with A2091 card and a Connor CP30100 121mb scsi hard
- drive and am attempting to add a 200mb Seagate ST-1239N hard drive to
- this configuration. I think I have most of it right but I am missing
- something.
-
- o The 2091 is terminated.
- o I have conected internal 50 pin ribbon from the 2091 to the Connor and
- looped this on to the Seagate.
- o I have removed the terminators on the Connor.
- o The Seagate is terminated.
-
- The system can see the Connor but not the Seagate.
-
- (The Seagate does work - I removed the Connor and preped the Seagate.)
-
- HDToolbox described the Connor disk as being address 0 unit 0, so I was
- wondering whether the Seagate disk need to be set to be at another
- address. The Seagate disk appears to have two sets of jumpers (and *of
- course* I don't have a manual) but I have tried changing them to no
- avail. One set have four pins like :: and I presume they are jumpered
- horizontally. The other is like .: and I presume they are jumpered both
- horizontally and vertically.
-
- Has anyone any suggestions. All help gratefully received 8-)
-
-
- ___ michaelj@earthlight.co.nz
- /\ /\ | Fidonet : 3:770/510
- //\\//\\ichael \|ohnstone Southlink : 99:200/110
-
-
-